Schneider Electric submitted this product for independent testing and qualification by third-party agencies. These agencies have certified this product as meeting the following standards.
NOTE: Always refer to the markings on the product to confirm the certifications.
Certifications for the Displays HMIDM6421, HMIDM6521, HMIDM7421, HMIDM7521, HMIDM9521, HMIDMA521 and for the Box HMIBMI, HMIPCCL2B5, HMIPCCL2B6
oUnderwriters Laboratories Inc., UL 60950, and CSA 60950 (Information Technology Equipment).
oRCM and EAC. Refer to product markings.
Certifications for the Box iPC HMIPCCP27, HMIPCCP2J, HMIPCCU27, and HMIPCCU2J
oIndustrial Control Equipment (UL 61010-2-201 and CSA C22.2 N° 61010-2-201) and for use in Class I Division 2 hazardous (classified) locations (ANSI/ISA 12.12.01 and CSA22.2 N°213). Refer to product markings.
oCCC, RCM, and EAC. Refer to product markings.
oCE Atex and IEC Ex as 3GD equipment category (for DC models). Refer to product markings.
oCE Atex and IEC Ex as 3D equipment category (for AC models). Refer to product markings.
Certifications for the Box iPC HMIBMP, HMIPCCP2B, HMIPCCP27, HMIPCCP2J (and Optional Displays HMIDM7421, HMIDM7521)
oDNV-GL (Merchant Navy agency).
oCCC, RCM, and EAC. Refer to product markings.
Certifications for the Box iPC HMIBMP, HMIBMU, HMIBMO, HMIPCCP2B, HMIPCCU2B, HMIPCCL2B1...4 and HMIDM7421, HMIDM7521
oIndustrial Control Equipment (UL 61010-2-201 and CSA C22.2 N° 61010-2-201) and for use in Class I Division 2 hazardous (classified) locations (ANSI/ISA 12.12.01 and CSA22.2 N°213). Refer to product markings.
oFor CE Atex and IEC Ex as 3GD equipment category (for DC models). Refer to product markings
oFor CE Atex and IEC Ex as 3D equipment category (for AC models). Refer to product markings
Certifications for the Displays HMIDM6421, HMIDM6521, HMIDM7421, HMIDM7521 with a Box iPC HMIBMP, HMIPCCP2B, HMIBMU, HMIPCCU2B, HMIBMO, HMIPCCL2B1...4
oIndustrial Control Equipment (UL 61010-2-201 and CSA C22.2 N° 61010-2-201) and for use in Class I Division 2 hazardous (classified) locations (ANSI/ISA 12.12.01 and CSA22.2 N°213). Refer to product markings.
Schneider Electric tested this product for compliance with the following compulsory standards:
oUnited States:
oFederal Communications Commission, FCC Part 15, Class A
oEurope: CE
o2014/35/EU Low Voltage Directive, based on IEC 60950 or IEC 61010-2-201
o2014/30/EU EMC Directive, class A, based on IEC 61000-6-2 and IEC 61000-6-4
oAustralia: RCM
oStandard AS/NZS CISPR11
Schneider Electric voluntarily tested this product to additional standards. The additional tests performed, and the standards under which the tests were conducted, are identified in the environmental characteristics.
This product is compliant with:
oWEEE, Directive 2012/19/EU
oRoHS, Directive 2011/65/EU and 2015/863/EU
oRoHS China, Standard GB/T 26572
oREACH regulation EC 1907/2006
NOTE: Documentation about sustainable development is available on Schneider Electric website (Product Environmental Profile and End of Life Instruction, RoHS, and REACH certificates).
End of Life (Waste Electrical and Electronic Equipment)
The product contains electronic boards. It must be disposed of in specific treatment channels. The product contains cells and/or storage batteries which must be collected and processed separately, when they have run out and at the end of product life (Directive 2012/19/EU).
Refer to the section Maintenance to extract cells and batteries from the product. These batteries do not contain a weight percentage of heavy metals over the threshold notified by European Directive 2006/66/CE.
The products described in this manual comply with the European Directives concerning Electromagnetic Compatibility and Low Voltage (CE marking) when used as specified in the relevant documentation, in applications for which they are intended, and in connection with approved third-party products.
