Message MS1400: The selected motion profile does not match the selected load profile. The load profile must have the same x offset, cycle time, x min and x max as the motion profile.
|
Message ID |
Message description |
Message type |
|---|---|---|
|
MS1400 |
The selected motion profile does not match the selected load profile. The load profile must have the same x offset, cycle time, x min and x max as the motion profile. |
Information |
The motion profile and the load diagram selected for the mechanics of your machine application do not match. The values for the parameters x offset, Cycle time as well as the X value for start and end points of a segment must be identical in both profiles.
Motion Sizer calculations do not lead to usable results if the values differ between load and motion.
Verify the values for x offset, Cycle time as well as the X value for start and end points you defined for the Cam and the load diagrams and adapt them.
Select a load case that corresponds to the motion profile when you define the mechanic of your machine application.
