|
Type |
ER |
|
Devices supporting the parameter |
Bus terminals BT-4/DIO1 and BT-4/DIO1 TP, Bus terminal BT-4/ENC1 |
|
Traceable |
Yes |
Specifies the bus address of the bus terminal.
|
Value |
Data type |
Meaning |
|---|---|---|
|
1–89 |
DINT |
Address of a physical (real) device. The address must also be set on the device, using both rotary switches. |
|
100–199 |
DINT |
Address of a virtual (non-real) device. |
NOTE: The address set at the BT-4 bus terminal via the two rotary switches on the front panel must match the address in the PLC configuration in parameter BusAddr of the BT-4 object. The address setting on the bus terminal BT-4 is applied only after applying the control voltage. Assign the last BT-4/ENC1 bus terminal on the PacNet to the address 8x (coding switch S1 Adr. 8).
