The list of parameters described in the table can be read or modified by using the HSCGetParam or HSCSetParam function blocks.
NOTE: Parameters set via the program override the parameters values configured in the HSC configuration. Initial configuration parameters are restored on cold or warm start.
This table provides the list of parameters from the HSC_PARAMETER_TYPE that can be read or modified while the program is running:
|
Parameter |
Description |
|---|---|
|
HSC_MODULO |
To get or set the Modulo value of an HSC. |
|
HSC_THRESHOLD0 |
To get or set the Threshold 0 value of an HSC. |
|
HSC_THRESHOLD1 |
To get or set the Threshold 1 value of an HSC. |
