Schneider Electric submitted this product for independent testing and qualification by third-party agencies. These agencies have certified this product as meeting the following standards:
oUnderwriters Laboratories Inc., UL 60950 and CSA 60950 (Information Technology Equipment).
oCCC, RCM, and EAC certification. Refer to product markings.
NOTE: Always refer to the markings on the product to confirm the certifications.
Schneider Electric tested this product for compliance with the following compulsory standards:
oUnited States:
oFederal Communications Commission, FCC Part 15, Class A
oEurope: CE
o2014/35/EU Low Voltage Directive, based on IEC 60950 or IEC 61010-2-201
o2014/30/EU EMC Directive, class A, based on IEC 61006-2 and IEC 61006-4
oAustralia:
oStandard AS/NZS CISPR11
Schneider Electric voluntarily tested this product to additional standards. The additional tests performed, and the standards under which the tests were conducted, are identified in the environmental characteristics.
This product is compliant with:
oWEEE, Directive 2012/19/EU
oRoHS, Directive 2011/65/EU and 2015/863/EU
oRoHS China, Standard GB/T 26572
oREACH regulation EC 1907/2006
NOTE: Documentation about sustainable development is available on Schneider Electric website (Product Environmental Profile and End of Life Instruction, RoHS and REACH certificates).
End of Life (Waste Electrical and Electronic Equipment)
The product contains electronic boards. It must be disposed of in specific treatment channels. The product contains cells and/or storage batteries which must be collected and processed separately when they have run out and at the end of product life 2012/19/EU.
Refer to the section Maintenance to extract cells and batteries from the product. These batteries do not contain a weight percentage of heavy metals over the threshold notified by European Directive 2012/19/EC.
The products described in this manual comply with the European Directives concerning Electromagnetic Compatibility and Low Voltage (CE marking) when used as specified in the relevant documentation, in applications for which they are intended, and in connection with approved third-party products.
