For details about the Advanced submenus, refer to:
oACPI Settings
oIT8768E Super I/O Configuration
oEmbedded Controller Configuration
oS5 RTC Wake Settings
oSerial Port Console Redirection
oCPU Configuration
oIDE Configuration
oMiscellaneous Configuration
oLAN Controller
oCSM Parameters
oUSB Configuration
|
BIOS setting |
Description |
|---|---|
|
Enable ACPI Auto Configuration |
Enables or disables BIOS ACPI auto configuration. |
|
Enable Hibernation |
Enables or disables hibernation. This option may be not effective with some OS. |
|
ACPI Sleep State |
Sets the ACPI sleep state. |
|
Lock Legacy Resources |
–. |
IT8768E Super IO Configuration Submenu
|
BIOS setting |
Description |
|---|---|
|
Serial Port 1 Configuration |
Serial Port: Enable or disable the COM port. |
|
Serial Port 2 Configuration |
Serial Port: Enable or disable the COM port. |
Embedded Controller Configuration Submenu
|
BIOS setting |
Description |
|---|---|
|
iManager WatchDog IRQ |
– |
|
EC Watch Dog Function |
– |
|
BIOS setting |
Description |
|---|---|
|
Wake system from S5 |
– |
Serial Port Console Redirection Submenu
|
BIOS setting |
Description |
|---|---|
|
COM 0 Console Redirection |
– |
|
COM 1 Console Redirection |
– |
|
Legacy Console Redirection Settings |
– |
|
Console Redirection |
– |
|
BIOS setting |
Description |
|---|---|
|
Execute Disable Bit |
Enables or disables the no-execution page protection. |
|
Intel Virtualization Technology |
Enable or disable Intel virtualization technology. When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool technology. |
|
BIOS setting |
Description |
|---|---|
|
Serial-ATA (SATA) |
Enable or disable SATA devices. |
|
SATA Test Mode |
Select SATA test mode selection. (Determines how SATA controllers operate). |
|
SATA Speed Support |
Indicates the maximum speed the SATA controller can support. |
|
SATA ODD Port |
– |
|
SATA Mode |
Select SATA mode selection. (Determines how SATA controllers operate). |
|
Serial ATA Port 0 |
Enable or disable serial ATA port. |
|
Serial ATA Port 0 HotPlug |
Designates this port as hot pluggable. |
|
Serial ATA Port 1 |
Enable or disable serial ATA port. |
|
Serial ATA Port 1 HotPlug |
Designates this port as hot pluggable. |
Miscellaneous Configuration Submenu
|
BIOS setting |
Description |
|---|---|
|
OS Selection |
– |
|
BIOS setting |
Description |
|---|---|
|
LAN A Controller |
– |
|
LAN B Controller |
– |
|
Wake on LAN Enable |
– |
|
BIOS setting |
Description |
|---|---|
|
CSM Support |
– |
|
GateA20 Active |
– |
|
Option ROM Messages |
– |
|
Boot option filter |
– |
|
Network |
– |
|
Storage |
– |
|
Video |
– |
|
Other PCI devices |
– |
|
BIOS setting |
Description |
|---|---|
|
Legacy USB Support |
Enable or disable legacy USB support. Auto option disables legacy support if no USB devices are connected. Disable option keeps USB devices available only for EFI applications. |
|
XHCI Hand-off |
Enable or disable XHCI hand-off. This is a work-around for OS without XHCI hand-off support. The XHCI ownership modify is claimed by XHCI driver. |
|
EHCI Hand-off |
Enable or disable EHCI hand-off. This is a workroom for OS without EHCI hand-off support. The EHCI ownership modify is claimed by EHCI driver. |
|
USB Mass Storage Driver Support |
Enable or disable USB mass storage driver support. |
|
USB transfer time-out |
Select time-out section. The time-out value for control, bulk, and interrupt transfers. |
|
Device reset time-out |
Select device time-out section. USB mass storage devices start unit command time-out. |
|
Device power-up delay |
Select device power-up section. Maximum time the device takes before it properly reports itself to the host controller. Auto uses a default value: for a root port, it is 100 ms, for a hub port the delay is taken from the hub descriptor. |
