The list of parameters described in the table can be read or modified by using the HSCGetParam or HSCSetParam function blocks.
NOTE: Parameters set via the program override the parameters values configured in the HSC configuration window. Initial configuration parameters are restored on a cold or warm start.
This table provides the list of parameters from the HSC_PARAMETER_TYPE which can be read or modified while the program is running:
|
Parameter |
Description |
|---|---|
|
HSC_PRESET |
to get or set the Preset value of an HSC |
|
HSC_THRESHOLD0 |
to get or set the Threshold 0 value of an HSC |
|
HSC_THRESHOLD1 |
to get or set the Threshold 1 value of an HSC |
