Overview of Configuration Steps
The following sections describes the process of setting up a Sercos bus, adding devices, configuring the network communication, configuring the individual devices, and commissioning the system with EcoStruxure Machine Expert Logic Builder.
|
Step |
Action |
|---|---|
|
1 |
Install and wire of the devices Refer to the hardware guides of the equipment to be operated on the Sercos bus for information on installation and wiring. |
|
2 |
|
|
3 |
|
|
4 |
|
|
5 |
|
|
6 |
|
|
7 |
|
|
8 |
Configure the parameters of a drive for cyclic communication |
|
9 |
