This section gives the TM5SPDG6D6F module characteristics.
See also Environmental Characteristics.
|
|
|
FIRE HAZARD |
|
oUse only the correct wire sizes for the maximum current capacity of the I/O channels and power supplies. oFor relay output (2 A) wiring, use conductors of at least 0.5 mm2 (AWG 20) with a temperature rating of at least 80 °C (176 °F). oFor common conductors of relay output wiring (7 A), or relay output wiring greater than 2 A, use conductors of at least 1.0 mm2 (AWG 16) with a temperature rating of at least 80 °C (176 °F). |
|
Failure to follow these instructions will result in death or serious injury. |
|
|
|
UNINTENDED EQUIPMENT OPERATION |
|
Do not exceed any of the rated values specified in the environmental and electrical characteristics tables. |
|
Failure to follow these instructions can result in death, serious injury, or equipment damage. |
The following table shows the general characteristics of the TM5SPDG6D6F electronic module:
|
General Characteristics |
|
|---|---|
|
Rated power supply voltage Power supply source |
0 Vdc and 24 Vdc Connected to the 24 Vdc I/O power segment. |
|
Status indicators |
Operating state, module status |
|
24 Vdc I/O power segment current draw |
6300 mA maximum |
|
TM5 power bus 5 Vdc current draw |
24 mA |
|
Power dissipation |
1.27 W maximum |
|
Weight |
25 g (0.9 oz) |
|
ID code |
9855 dec |
The following table shows the common characteristics of the TM5SPDG6D6F electronic module:
|
Common Characteristics |
||
|---|---|---|
|
Rated output voltage |
0 Vdc and 24 Vdc from the 24 Vdc I/O power segment |
|
|
Protection |
Integrated fuse type T slow-blow 6.3 A 250 V exchangeable |
|
