The table below describes the main characteristics of the TM5SAI2PH electronic module:
|
Main Characteristics |
||
|---|---|---|
|
Number of input channels |
2 |
|
|
Measurement type |
Temperature |
Resistance |
|
Input sensor type |
- |
|
|
Input range |
-200°C...850°C |
0.1 Ω...4500 Ω / 0.05 Ω...2250 Ω |
|
Resolution |
16-bit |
|
The following figure shows the slice with a TM5SAI2PH:
The table below shows the model numbers for the terminal block and bus base associated to TM5SAI2PH:
|
Number |
Model Number |
Description |
Color |
|---|---|---|---|
|
1 |
TM5ACBM11 or TM5ACBM15 |
Bus base
Bus base with address setting |
White
White |
|
2 |
TM5ASAI2PH |
Electronic module |
White |
|
3 |
TM5ACTB06 or TM5ACTB12 |
Terminal block, 6 pins
Terminal block, 12 pins |
White
White |
NOTE: For more information, refer to TM5 bus bases and terminal blocks
The following figure shows the LEDs for TM5SAI2PH:
The table below shows the TM5SAI2PH status LEDs:
|
LEDs |
Color |
Status |
Description |
|---|---|---|---|
|
r |
Green |
Off |
No power supply |
|
Single Flash |
Reset state |
||
|
Flashing |
Preoperational state |
||
|
On |
Normal operation |
||
|
e |
Red |
Off |
OK or no power supply |
|
On |
Detected error or reset state |
||
|
Single Flash |
Detected error for an I/O channel. |
||
|
e+r |
Steady Red / Single Green Flash |
Invalid firmware |
|
|
0-1 |
Green |
Off |
Channel not configured |
|
Flashing |
Overflow, underflow or broken wire detected |
||
|
On |
The analog/digital converter is running, value is available |
||
