To mount the sensors to the actuator profile, sensor holders are required. The sensor holders can be mounted at two sides of the actuator profile:
oOn the lubrication nipple side
oOn the opposite of the lubrication nipple side
You need the following tools to mount a sensor:
oTorque wrench with a set of hexagon sockets
For suitable parts, refer to Replacement Equipment of the Lexium EAC1-Series.
Preparing the Mounting of the Sensor
|
Step |
Action |
|---|---|
|
1 |
Verify the sensor for correct type and function. |
|
2 |
Verify that your controller and your interface are suitable for the sensor. |
|
3 |
Clean all parts. |
|
4 |
Inspect all parts for damage. |
For detailed instructions on sensor mounting, refer to Unimotion Maintenance- and Assembly Instructions PNCE Electric Cylinder.
