Refer to Diagnostic class (standard): 2
|
Default reaction |
||
|---|---|---|
|
D |
E |
|
|
D |
E |
The DC bus voltage is too high. A further increase can lead to the diagnostic message 8108 DC bus overvoltage.
|
Device |
Thresholds |
|---|---|
|
Lexium 62 Power Supply |
o410 Vdc if BrakingResistorMode is set to 230 V mode / 0. o850 Vdc if BrakingResistorMode is set to 400 V mode / 1 (default value). |
The voltage threshold for this diagnostic message is only dependent on the parameter BrakingResistorMode. The parameter MainsVoltageMode has no influence on this threshold.
For information on causes and measures, see 8108 DC bus overvoltage.
