IF_SercosDeviceIdentification - General Information
|
Type: |
Interface |
|
Available as of: |
SystemConfigurationItf_1. |
|
Inherits from: |
— |
|
Versions: |
current version |
The interface manages the properties that are used to identify the device.
|
Name |
Data type |
Accessing |
Description |
|---|---|---|---|
|
ApplicationType |
STRING[40] |
|
Displays the application type. |
|
ConfiguredApplicationType |
STRING[40] |
|
Displays the configured application type. |
|
ConfiguredSercosAddress |
UINT |
|
Displays the configured Sercos address. |
|
ConfiguredSerialNumber |
STRING[80] |
|
Displays the serial number of a motor controller found at the Sercos bus, which the drive is to be assigned to. |
|
ConfiguredTopologyAddress |
UINT |
|
Displays the topological address found at the Sercos bus, which the device is to be assigned to. |
|
IdentificationMode |
DINT |
|
Displays the identification mode. |
|
IdentifyDevice |
BOOL |
|
Enables/disables the device identification. |
|
SercosAddress |
UINT |
|
Displays the Sercos address which the device has been assigned to. |
|
SerialNumber |
STRING[80] |
|
Displays the serial number of the controller. |
|
TopologyAddress |
UINT |
|
Displays the physical position of the device in the Sercos ring. |
|
VendorCode |
WORD |
|
Displays the manufacturer's code of the device. |
|
VendorDeviceId |
STRING[80] |
|
Displays the Sercos device identifier. |
|
WorkingMode |
DINT |
|
Determines the operating mode of the device. |
|
WorkingState |
DINT |
|
Displays the currently active mode. |
