PhaseCheckMode

General

Type	EF
Devices supporting the parameter	Lexium LXM62 Power Supply
Traceable	Yes

Functional Description

Sets the phase monitoring mode.

Value	Data type	Meaning
Phase check disabled / 0	DINT	For the Lexium LXM62 Power Supply power supply, a three-phase infeed is required. The following diagnostic message is switched off: o8961 Phase failure message
Check only one phase / 1	DINT	A single-phase infeed is necessary. The diagnostic message for the phase check is active.
Check all three phases / 2	DINT	A three-phase infeed is necessary. The diagnostic message for the phase check is active.

Value

Data type

Meaning

Phase check disabled / 0

DINT

For the Lexium LXM62 Power Supply power supply, a three-phase infeed is required.

The following diagnostic message is switched off:

Check only one phase / 1

DINT

A single-phase infeed is necessary.

The diagnostic message for the phase check is active.

Check all three phases / 2

DINT

A three-phase infeed is necessary.

The diagnostic message for the phase check is active.

NOTE: Modifications to the parameter are only applied during the Sercos phase up (communication phase 0 => communication phase 4).