1

Go to the Schneider Electric home page www.schneider-electric.com.

     2

In the Search box type the reference of a product or the name of a product range.

oDo not include blank spaces in the reference or product range.

oTo get information on grouping similar modules, use asterisks (*).

     3

If you entered a reference, go to the Product Datasheets search results and click on the reference that interests you.

If you entered the name of a product range, go to the Product Ranges search results and click on the product range that interests you.

     4

If more than one reference appears in the Products search results, click on the reference that interests you.

     5

Depending on the size of your screen, you may need to scroll down to see the data sheet.

     6

To save or print a data sheet as a .pdf file, click Download XXX product datasheet.

Magelis SCU HMI Controller Programming Guide

EIO0000001240 (eng), EIO0000001241 (fre), EIO0000001242 (ger), EIO0000001243 (spa), EIO0000001244 (ita), EIO0000001245 (chs)

Magelis SCU HMI Controller PLCSystem Library Guide

EIO0000001246 (eng), EIO0000001247 (fre), EIO0000001248 (ger), EIO0000001249 (spa), EIO0000001250 (ita), EIO0000001251 (chs)

Magelis SCU HMI Controller HSC Library Guide

EIO0000001512 (eng), EIO0000001513 (fre), EIO0000001514 (ger), EIO0000001515 (spa), EIO0000001516 (ita), EIO0000001517 (chs)

Magelis SCU HMI Controller PTO/PWM Library Guide

EIO0000001518 (eng), EIO0000001519 (fre), EIO0000001520 (ger), EIO0000001521 (spa), EIO0000001522 (ita), EIO0000001523 (chs)

Magelis SCU HMI Quick Reference Guide

S1B90406 (Eng)

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

oDisconnect all power from all equipment including connected devices prior to removing any covers or doors, or installing or removing any accessories, hardware, cables, or wires except under the specific conditions specified in the appropriate hardware guide for this equipment.

oAlways use a properly rated voltage sensing device to confirm the power is off where and when indicated.

oReplace and secure all covers, accessories, hardware, cables, and wires and confirm that a proper ground connection exists before applying power to the unit.

oUse only the specified voltage when operating this equipment and any associated products.

Failure to follow these instructions will result in death or serious injury.

WARNING

LOSS OF CONTROL

oConsider the potential failure modes of control paths in the machine control system design, such as:

oThe possibility of backlight failure,

oUnanticipated link transmission delays or failures,

oThe operator being unable to control the machine,

oThe operator making errors in the control of the machine.

oProvide a means to achieve a safe state during and after a path failure for critical control functions such as emergency stop and overtravel stop.

oProvide separate or redundant control paths for critical control functions.

oObserve all accident prevention regulations and local safety guidelines.¹

oTest individually and thoroughly each implementation of the equipment for correct operation before service.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

WARNING

UNINTENDED EQUIPMENT OPERATION

oOnly use software approved by Schneider Electric for use with this equipment.

oUpdate your application program every time you change the physical hardware configuration.

Failure to follow these instructions can result in death, serious injury, or equipment damage.