IF_TargetsHandlerEventsListener - OnAddTargetWithSlots (Method)

Overview

Type:	Method
Available as of:	V1.4.1.0

This chapter provides information on:

oTask

oDescription

oInterface

oDiagnostic Messages

Task

Provides user-specific diagnostics when a target with slots is added to the list.

Description

The OnAddTargetWithSlots method is called by the targets handler where the implementation of IF_TargetsHandlerEventsListener has been subscribed every time a target and its slots are added to the list.

The following methods trigger the event:

oAddTarget

oAddTargetFromTargetWithSlots

oAddTargetWithSlots

The diagnostics provided as output depend on your specific implementation. They are ignored by the library.

Interface

Input	Data type	Description
i_stTargetWithSlots	ST_RobotTargetWithSlots	Robot target structure containing the information on the target and its slots that has been added to the list.

Output	Data type	Description
q_etDiag	GD.ET_Diag	General library-independent statement on the diagnostic. A value unequal to GD.ET_Diag.Ok corresponds to a diagnostic message.
q_etDiagExt	ET_DiagExt	POU-specific output on the diagnostic. q_etDiag = ET_Diag.Ok -> Status message q_etDiag <> ET_Diag.Ok -> Diagnostic message
q_sMsg	STRING[80]	Event-triggered message that gives more detailed information on the diagnostic state.

Output

Data type

Description

q_etDiag

GD.ET_Diag

General library-independent statement on the diagnostic. A value unequal to GD.ET_Diag.Ok corresponds to a diagnostic message.

q_etDiagExt

ET_DiagExt

POU-specific output on the diagnostic.

q_etDiag = ET_Diag.Ok -> Status message

q_etDiag <> ET_Diag.Ok -> Diagnostic message

q_sMsg

STRING[80]

Event-triggered message that gives more detailed information on the diagnostic state.

Diagnostic Messages

q_etDiag	q_etDiagExt	Enumeration value	Description
Ok	Ok	0	Ok

Enumeration name:	Ok
Enumeration value:	0
Description:	Ok

Status Message: The method has been successfully called.