The list of parameters described in the table can be read or modified by using the EXPERTGetParam or EXPERTSetParam function blocks.
NOTE: Parameters set via the program override the parameters values configured in the HSC configuration window. Initial configuration parameters are restored on a cold or warm start.
This table provides the list of parameters from the EXPERT_PARAMETER_TYPE which can be read or modified while the program is running:
|
Parameter |
Description |
|---|---|
|
EXPERT_PRESET |
to get or set the Preset value of an HSC |
|
EXPERT_THRESHOLD0 |
to get or set the Threshold 0 value of an HSC |
|
EXPERT_THRESHOLD1 |
to get or set the Threshold 1 value of an HSC |
|
EXPERT_THRESHOLD2 |
to get or set the Threshold 2 value of an HSC |
|
EXPERT_THRESHOLD3 |
to get or set the Threshold 3 value of an HSC |
|
EXPERT_REFLEX0 |
to get or set output 0 reflex mode of an EXPERT function |
|
EXPERT_REFLEX1 |
to get or set output 1 reflex mode of an EXPERT function |
