Machine Expert Network Manager

Introduction

The Machine Expert Network Manager must be used if you want to exchange variables with a Machine Expert compatible HMI such as the Magelis GXO using a Machine Expert software protocol.

NOTE: The parameters of Physical Setting can only be kept as default values under the Machine Expert Network Manager. They cannot be modified.

NOTE: Machine Expert Network Manager is automatically added to the Serial Line 1 node of the Devices tree.

Adding the Manager

To add a Machine Expert Network Manager to your project, select the Machine Expert-Network Manager in the Hardware Catalog, drag it to the Devices tree, and drop it on one of the highlighted nodes.

Configuring the Manager

There is no configuration for the Machine Expert Network Manager.