PLC_W: Controller Read/Write System Variables
This table describes the parameters of the PLC_W system variable (PLC_W_STRUCT type):
|
%MW |
Var Name |
Type |
Comment |
|---|---|---|---|
|
n/a |
q_uiOpenPLCControl |
When Value passes from 0 to 6699, the command previously written in the following PLC_W.q_wPLCControl is executed. |
|
|
n/a |
q_wPLCControl |
Controller RUN / STOP command executed when the system variable PLC_W.q_uiOpenPLCControl value passes from 0 to 6699. |
NOTE: n/a means that there is no pre-defined %MW mapping for this system variable.
