The Simple Network Management Protocol (SNMP) is used to provide the data and services required for managing a network.
The data is stored in a Management Information Base (MIB). The SNMP protocol is used to read or write MIB data. Implementation of the Ethernet SNMP services is minimal, as only the compulsory objects are handled.
This table presents the supported server objects:
|
Object |
Description |
Access |
Value |
|---|---|---|---|
|
sysDescr |
Text description of the device |
Read |
SCHNEIDER M258 Fast Ethernet TCP/IP |
|
sysObjectID |
Points to the product reference in the private MIB |
Read |
1.3.6.1.4.1.3833.1.7.36 |
|
sysUpTime |
Time elapsed since the controller was last turned on |
Read |
- |
|
sysContact |
Data item used to contact the manager of this node |
Read/Write |
- |
|
sysName |
Node administrative name |
Read/Write |
TM258LF42DT |
|
sysLocation |
Physical location of the product |
Read/Write |
- |
|
sysService |
Indicates the type of service provided by this product |
Read |
79 |
The size of these character strings is limited to 50 characters.
The values written are saved to the controller via SNMP client tool software. The Schneider Electric software for this is ConneXview. ConneXview is not supplied with the controller or bus coupler. For more details, refer to www.schneider-electric.com.
