Users and Groups and Access Right tabs allows to manage user accounts, user access rights groups and the associated access rights, to control the access on projects. For more informations, refer to the EcoStruxure Machine Expert Programming Guide.
Login and password are set by default. They must be activated and can be reset as origin.
This table describes how to log in:
|
Server/feature |
First connection Login / Password |
User rights Login / Password |
Connection after reset to default Login / Password |
|---|---|---|---|
|
EcoStruxure Machine Expert |
Administrator / Administrator |
Administrator / configured password |
Administrator / Administrator |
|
HTTP |
No login possible |
Administrator / configured password |
No login possible |
|
FTP |
No login possible |
Administrator / configured password |
No login possible |
|
Change Device Name feature |
No login possible |
Administrator / configured password |
No login possible |
|
|
|
UNAUTHORIZED DATA ACCESS |
|
oSecure access to the FTP/Web server using User Rights. oIf you do not enable User Rights, disable the FTP/Web server to help prevent any unwanted or unauthorized access to data in your application. |
|
Failure to follow these instructions can result in death, serious injury, or equipment damage. |
NOTE: Anonymous login can be restored by removing the user rights in the User Management page of the web server.
NOTE:
The following characters are supported by the controller:
ologin: a…z A…Z 0...9 - = [ ] \ ; ' , / ! @ # $ % ^ & * ( ) _ + { } | : " < > ? ` ~
opassword: a...z A…Z 0...9 - = [ ] \ ; ' , / ! @ # $ % ^ & * ( ) _ + { } | : " < > ? ` ~ and space
One user and two groups are set by default:
oUser: Administrator
oGroups: Administrator and Everyone
You can give Access Rights to groups.
You can allow the following operations through the access rights:
oVIEW
oMODIFY
oEXECUTE
oADD_REMOVE
The only way to gain access to a controller that has user access-rights enabled and for which you do not have the password(s) is by performing an Update Firmware operation. This clearing of User Rights can only be accomplished by using an SD card or a USB key (depending on the support of your particular controller) to update the controller firmware. In addition, you may clear the User Rights in the controller by running a script (for more information, refer to EcoStruxure Machine Expert Programming Guide). This effectively removes the existing application from the controller memory, but restores the ability to access the Controller.
