TMS Expansion Module Configuration
The Modicon M262 Logic/Motion Controller supports the TMS communication expansion modules.
TMS expansion modules connect to the left side of the controller and are dedicated to Ethernet and CANopen high speed communication. You can configure your TMS expansion modules in the EcoStruxure Machine Expert Devices Tree.
NOTE: The TMSES4 expansion module is not a standalone Ethernet switch.
For further information about the TMS expansion modules configuration, refer to the TMS Expansion Modules Configuration Programming Guide.
|
|
|
UNINTENDED EQUIPMENT OPERATION |
|
oOnly use software approved by Schneider Electric for use with this equipment. oUpdate your application program every time you change the physical hardware configuration. |
|
Failure to follow these instructions can result in death, serious injury, or equipment damage. |
To add an expansion module to your controller, select the expansion module in the Hardware Catalog, drag it to the Devices tree, and drop it on one of the highlighted nodes.
For more information on adding a device to your project, refer to:
• Using the Drag-and-drop Method
• Using the Contextual Menu or Plus Button
Compatibility of the TMS Communication Expansion Modules
You can connect a maximum of 3 TMS modules to the controller (3 TMSES4 modules, or 2 TMSES4 modules and one TMSCO1 module).
