The table below describes the main characteristics of the TM5SDO12T electronic module:
|
Main Characteristics |
|
|---|---|
|
Number of output channels |
12 |
|
Output type |
Transistor |
|
Signal type |
Source |
|
Rated input voltage |
24 Vdc |
|
Output current |
0.5 A max. |
The following illustration shows the TM5SDO12T:
The table below shows the model numbers for the terminal block and the bus bases associated with the TM5SDO12T:
|
Number |
Model Number |
Description |
Color |
|---|---|---|---|
|
1 |
TM5ACBM11 or TM5ACBM15 |
Bus base
Bus base with address setting |
White
White |
|
2 |
TM5SDO12T |
Electronic Module |
White |
|
3 |
TM5ACTB12 |
Terminal block, 12 pins |
White |
NOTE: For more information, refer to TM5 bus bases and terminal blocks.
The following illustration shows LEDs for TM5SDO12T:
The table below shows the TM5SDO12T status LEDs:
|
LEDs |
Color |
Status |
Description |
|---|---|---|---|
|
r |
Green |
Off |
No power supply |
|
Single Flash |
Reset state |
||
|
Flashing |
Preoperational state |
||
|
On |
Normal operation |
||
|
e |
Red |
Off |
OK or no power supply |
|
Single flash |
Error detected on output channels(1) |
||
|
e+r |
Steady Red / Single Green flash |
Invalid firmware |
|
|
0 - 11 |
Yellow |
Off |
Corresponding output deactivated |
|
On |
Corresponding output activated |
||
|
NOTE: (1) The e LED flashes when detecting one of the following errors on output channels: oShort circuit oOverload oNo I/O supply but the TM5 bus still powered and the output is activated |
|||
