Description
The parameter values, both active and those saved in nonvolatile memory, are lost in this process.
|
NOTICE
|
|
LOSS OF DATA
Perform a backup of the drive parameters prior to restoring factory settings (factory established parameter values).
Failure to follow these instructions can result in equipment damage.
|
The commissioning software allows you to save the parameter values set for a drive as a configuration file. For information on saving the existing parameters in the drive, see Parameter Management.
The factory settings can be restored via the HMI or the commissioning software.
Disconnect the drive from the fieldbus before you restore the factory settings.
Factory Settings via HMI
Use the menu items of the HMI to restore the factory settings. Confirm the selection with (yes).
The new settings only become active until after the 24 Vdc control supply of the drive is power cycled.
Factory Settings via Commissioning Software
Use the menu items in the commissioning software to restore the factory settings.
The new settings only become active until after the 24 Vdc control supply of the drive is power cycled.