Managing the Devices Network Settings

Setting the IP Address Configuration

You can modify the IPv4 address and subnet mask of your slave device using the command Set IP Address:

Step	Action
1	Click the desired device.
2	Click the locate button to make the LED of the target device flash.
3	Click the Set IP Address command. Result: The set IP menu is displayed.
4	Modify the data in the desired fields.
5	Check the save box.
6	Click the Send command button before closing.

Setting DHCP

You can use DHCP and modify the DHCP name of your slave device using the command Set DHCP:

Step	Action
1	Click the desired device.
2	Click the locate button to make the LED of the target device flash.
3	Click the Set DHCP command. Result: The set DHCP menu is displayed.
4	Modify the DHCP network name in the required fields.
5	Check the save box.
6	Click the Send command button before closing.

NOTE: the network name modification is applied at next power ON.

Setting BOOTP

You can use BOOTP using the command Set BOOTP:

Step	Action
1	Click the desired device.
2	Click the locate button to make the LED of the target device flash.
3	Click the Set BOOTP command. Result: The set BOOTP menu is displayed.
4	Check the save box.
5	Click the Send command button before closing.

Create Link/Delete Link

You can create a network link to a device using the command Create link. A link to the device appears and allows users to connect to the device via the Web server. You can delete the link by clicking Delete http link. These commands are available by using Machine Assistant in the Web server.

NOTE: You must select the secure option to create an operational secured link (HTTPS).