Approved Servo Drives

Overview

Drive systems may perform unintended movements if unapproved combinations of drive and motor are used. Even if motors are similar, different adjustment of the encoder system may be a source of hazards. Even if the connectors for motor connection and encoder connection match mechanically, this does not imply that the motor is approved for use.

WARNING
	UNINTENDED MOVEMENT Only use approved combinations of drive and motor. Failure to follow these instructions can result in death, serious injury, or equipment damage.

The motor may be operated with the following servo drives:

Servo drive	Servo motor with one-cable connection	Servo motor with two-cable connection
LXM52	-	✓
LXM62D•••C, LXM62D•••D, LXM62D•••G	✓	✓
LXM62D•••E, LXM62D•••F	-	✓
✓ Approved - Not approved

When selecting, refer to the servo drive type and the level of mains voltage to select an appropriate servo drive product.

In accordance with our continual introduction of new product, contact your Schneider Electric representative for additional compatible servo drive products as they become available.