Description
-
Potential distributors, 6 x 24 Vdc and 6 x ground (internally fed supply)
-
Integrated micro-fuse
-
Can be used as feed module for the I/O supply.
NOTE: Since the 6 x 24 Vdc terminals are interconnected and the fuse is between the clamping points and the internal I/O supply, the clamping potentials when using an external supply are not short-circuit protected. Thus, in the case of an external supply the respective 24 Vdc clamping points must be secured by using an external fuse.
Configuration Register
For further information, see the TM5/TM7 System Planning and Installation Guide.