StaticAddressCount

General

Type

Devices supporting the parameter

PacDrive LMC x00C,

PacDrive LMC x01C

Traceable

Yes

Functional Description

Using this parameter, you can reserve some addresses for the manual configuration of slave devices.

Value	Data type	Meaning
0 (default)	UINT	Number of addresses that shall be reserved for the manual configuration of slave devices. Also see parameter IPConfigMode. For this purpose, you have to set the parameter to a value greater than or equal to the number of slaves which are to be configured manually. Access type: read/write

Value

Data type

Meaning

0 (default)

UINT

Number of addresses that shall be reserved for the manual configuration of slave devices. Also see parameter IPConfigMode.

For this purpose, you have to set the parameter to a value greater than or equal to the number of slaves which are to be configured manually.

Access type: read/write

While a value for this parameter is being entered, it is checked whether the entered value lies within the value range of 0-1007.

NOTE: If a Safety Logic Controller (SLC) is added to a Sercos III bus, the current value of StaticAddressCount automatically increases by 1. Thus, the value of StaticAddressCount is automatically decreased by 1 if a Safety Logic Controller was deleted from a Sercos III bus.