TM2...N Modules General Description
The range of TM2...N expansion modules includes:
oTM2...N digital and analog
oTM2DOCKN adaptor module for TM2 or TM3 expansion modules
For further details, refer to TM2...N expansion modules.
The TM2...N expansion modules are connected directly with the controller by a soft ribbon cable.
|
Reference |
Description |
|---|---|
|
8 regular inputs, 8 relay outputs |
|
|
4 analog inputs |
|
The adaptor module allows you to connect the TM2 or TM3 expansion modules to your M218 controller:
|
Reference |
Description |
|---|---|
|
Adaptor module for TM2 or TM3 expansion modules |
If you need to mix TM3 expansion modules withTM2...N Analog I/O expansion modules on the same project, you must update the firmware of the TM2...N Analog I/O expansion modules. To update the firmware, refer to Changing the TM2...N Analog I/O Expansion Modules Firmware.During all the firmware update procedure:
oThe controller must be disconnected from the system and applications it effects.
oThe PC, the controller and the I/O module must stay connected together.
|
|
|
UNINTENDED EQUIPMENT OPERATION |
|
oOnly use software approved by Schneider Electric for use with this equipment oUpdate your application program every time you change the physical hardware configuration. |
|
Failure to follow these instructions can result in death, serious injury, or equipment damage. |
