Replacing the Toothed Belt (Optional Equipment)
The toothed belt is a part of the belt drive (optional equipment). Replacing the toothed belt can cause unintended movements.
|
|
|
UNINTENDED MOVEMENTS DUE TO DISMOUNTING |
|
Secure the moving parts of the actuator mounted in a vertical or tilted position against unexpected movements. |
|
Failure to follow these instructions can result in death, serious injury, or equipment damage. |
You need the following tools to replace the toothed belt:
oSet of hex keys
NOTE: Do not use ball head hex keys. Excessive torque may cause the ball head to break away. A broken ball head makes the removal of the screw difficult.
For suitable parts, refer to Replacement Equipment of the Lexium EAC1-Series.
Preparing the Replacement of the Toothed Belt
|
Step |
Action |
|---|---|
|
1 |
If the actuator is mounted tilted or vertically, remove the payload or support the payload and the piston rod to keep it from falling. |
For detailed instructions on replacing the toothed belt, refer to Unimotion Maintenance- and Assembly Instructions PNCE Electric Cylinder.
