Unpacking

Overview

Before you start to unpack and position the components of the Lexium™ MC12 multi carrier, pay special attention to the accident prevention regulations and the safety regulations.

WARNING
	CRUSHING, SHEARING, CUTTING AND HITTING DURING HANDLING Observe the general construction and safety regulations for handling and assembly. Use appropriate mounting and transport equipment and use appropriate tools. Prevent clamping and crushing by taking appropriate precautions. Cover edges and angles to protect against cutting damage. Wear suitable protective clothing (for example, protective goggles, protective boots, protective gloves). Failure to follow these instructions can result in death, serious injury, or equipment damage.

WARNING

CRUSHING, SHEARING, CUTTING AND HITTING DURING HANDLING

Observe the general construction and safety regulations for handling and assembly.
Use appropriate mounting and transport equipment and use appropriate tools.
Prevent clamping and crushing by taking appropriate precautions.
Cover edges and angles to protect against cutting damage.
Wear suitable protective clothing (for example, protective goggles, protective boots, protective gloves).

Failure to follow these instructions can result in death, serious injury, or equipment damage.

Unpacking

Step	Action
1	Transport the components of the Lexium™ MC12 multi carrier in its packaging as close as possible to the installation site.
2	Open the cardboard box with appropriate tools.
3	Verify the components of the Lexium™ MC12 multi carrier for transport damage.
4	NOTE: Also refer to Transporting the Lexium™ MC12 carriers.

NOTE: In case of any transport damage, contact your local Schneider Electric service representative.