Overview
The SchneiderElectricRobotics Toolbox library provides structures, functions, and function blocks:
-
To read the protocol of a camera.
-
To send data, for example, to simulate the protocol of a camera.
-
To generate robot targets, for example, to simulate products.
System Requirements
Using the library with other versions of software or firmware may have results other than described in the present documentation.
|
WARNING
|
|
UNINTENDED EQUIPMENT OPERATION
-
Be sure that the software and firmware are of the versions supported by this library.
-
Contact your Schneider Electric service representative for compatibility information.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
|
Supported Hardware
-
PacDrive LMC Eco
-
PacDrive LMC Pro
-
PacDrive LMC Pro2
Firmware Requirements
PacDrive 3 V4.4
-
PacDrive LMC Eco V1.56.15.12 or greater
-
PacDrive LMC Pro V1.56.15.12 or greater
-
PacDrive LMC Pro2 V1.56.15.12 or greater