Electromagnetic Disturbances of Signals and Devices
This product meets the EMC requirements according to the standard IEC 61800-3 emission category C2 if generally accepted practices to limit electromagnetic interference are implemented during installation.
As this product does not meet the EMC requirements according to the standard IEC 61800-3 emission category C1, signal and equipment interference can cause unexpected responses of other equipment in the vicinity of this equipment.
|
WARNING
|
|
SIGNAL AND EQUIPMENT INTERFERENCE
-
Install the wiring in accordance with the EMC requirements described in the present document.
-
Verify compliance with the EMC requirements described in the present document.
-
Verify compliance with all EMC regulations and requirements applicable in the country in which the product is to be operated and with all EMC regulations and requirements applicable at the installation site.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
|
These types of devices are not intended to be used on a low-voltage public network which supplies domestic premises. Radio frequency interference is expected if used in such a network.
|
WARNING
|
|
RADIO INTERFERENCE
Do not use these products in domestic electrical networks.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
|