|
Type |
AD |
|
Devices supporting the parameter |
Lexium LXM52 Drive, Lexium LXM52 Linear Drive, Lexium LXM62 Drive, Lexium LXM62 Linear Drive, Lexium ILM62 Drive Module, Lexium LXM62 Power Supply |
|
Traceable |
No |
The parameter indicates the length (in a string separated by semicolon) of the additional configured master data. The addresses of the master data can be calculated together with the parameter AdditionalIDNListMDTAdr.
Example: 2;
The default value is ''. That is, there are no additional drive data in the real-time channel.
If there is an error detected while evaluating the IDN string, the following messages can occur instead of the numerical values:
'ERROR read attribute (xxxx)' -> The length of the parameter could not be read. The exact detected error code is indicated in brackets. For example, (0x1001) = IDN is not supported by this device.
'ERROR wrong attribute (xxxx)' -> The parameter has a non-supported data type. Only parameters with a static data length 2, 4 byte, and 8 byte are supported. The read out Sercos attribute is indicated in brackets.
'ERROR parsing IDN-List!' -> The IDN string could not be evaluated correctly.
Numerical values and detected error messages can also occur in a mixed manner. In this case, only the IDNs are configured in the real-time data if the numerical values are identified as valid.