|
Type |
AD |
|
Devices supporting the parameter |
PacDrive LMC x00C, OnBoard I/O, DIO8 module, Bus terminals BT-4/DIO1 and BT-4/DIO1 TP |
|
Traceable |
Yes |
The parameter represents the position (at FC_TpEdge()) that has been captured when the Touchprobe event occurred. The value is reset to 0.00 when FC_TPEdge() is called again.
Resolution of the measure inputs for the TP_Edge() function
|
Device (Measure Inputs) |
Resolution |
|---|---|
|
PacDrive LMC x00C |
10 µs |
|
Lexium LXM62 Drive |
10 µs |
|
DIO8 module |
10 µs |
The position resolution depends on the velocity when the Touchprobe is triggered.
