The Magelis SCU HMI Controller is equipped with 1 serial line:
|
Serial Line |
Supported protocol |
|---|---|
|
COM1 |
SoMachine Network Manager (default) |
The following table indicates the Manager baud rate characteristic:
|
Manager |
Maximum Baud Rate (bits/s) |
Supported Baud Rate (bits/s) |
|---|---|---|
|
SoMachine Network Manager |
115200 |
115200, 57600, 38400, 19200, 9600 |
|
Modbus Manager |
115200 |
115200, 57600, 38400, 19200, 9600 |
NOTE: If you wish to use COM1 for protocols added in the Vijeo Designer editor, remove the Modbus_Manager and SoMachine-Network_Manager nodes from under the COM1 node in the Device Tree. This allows the Vijeo Designer Runtime to take control of COM1.
