Adding the TM5SE4IOL Module and IO-Link Devices to Your Application

Adding the TM5SE4IOL Module to Your Application

Step	Action
1	Launch the programming software EcoStruxure Machine Expert.
2	Create a new project with File > New Project with a PacDrive LMC Eco/PacDrive LMC Pro/Pro2 or Modicon M262 Logic/Motion controller.
3	In the Devices tree, right-click the corresponding node and select Add Device from the contextual menu.
4	In the Add Device dialog box, select the bus Interface TM5NS31 or the bus interface TM5NEIP1 and confirm with Add Device.
5	In the Devices tree, right-click the TM5NS31 node or the TM5NEIP1 node and select Add Device from the contextual menu.
6	In the Add Device dialog box, select TM5 Communication Modules > TM5SE4IOL or TM5 Communication Modules > TM5NEIP1 and confirm with Add Device.
7	In the Devices tree, double-click the TM5SE4IOL node to open its module editor where you can edit the module parameters.

After you have added the TM5SE4IOL module, four slots for IO-Link devices are available. Empty slots are identified by the entry <Empty>. Slots to which an IO-Link device have been assigned have the name of the IO-Link device.

Importing IO-Link Devices Into Your Application

Step	Action
1	Download the IODD (IO-Link Device Description) XML file for your IO-Link device from the IO-Link website at https://ioddfinder.io-link.com/#/.
2	In EcoStruxure Machine Expert, select Tools > Device Repository.
3	In theDevice Repository window, click the Install ... button.
4	In the dialog box, navigate to the storage location of the IODD XML file of your IO-Link device, select the XML file and click the Close button.

Adding an IO-Link Device to Your Application

Step	Action
1	In the Devices tree below the TM5SE4IOL node, right-click the first <Empty> slot and select Plug Device from the contextual menu. NOTE: If you right-click a slot that is not <Empty>, the IO-Link device already assigned to this slot is replaced by the new IO-Link device to be added.
2	In the Plug Device window, select <All Vendors> from the Vendor listbox.
3	Select the IO-Link device you want to add and click the Plug Device button.

NOTE: To modify parameter values of an IO-Link device, double-click the corresponding device entry below the TM5SE4IOL node in the Devices tree. Refer to IO-Link Devices - Parameter Configuration for details.

Removing an IO-Link Device From Your Application

Step	Action
1	Right-click the IO-Link device to be removed from your application and select Delete from the contextual menu.