Mechanical and Electrical Data for the Lexium 62 Power Supply

Technical Data for the Lexium 62 Power Supply

Designation

Parameter

Value

Reference

LXM62PD84A11000

LXM62PD20A11000

Power supply

Rated supply voltage 3AC

Minimum 380 Vac (-10%) / Nominal 400 Vac / Maximum 480 Vac (+10%)

Minimum 208 Vac (-10%) / Nominal 230 Vac / Maximum 360 Vac (+10%)

Adjust the parameter MainsVoltageMode of the power supply according to the nominal supply voltage.

Rated supply voltage 1AC

Minimum 208 Vac (-10%) / Nominal 230 Vac / Maximum 270 Vac (+10%)

Rated supply current

Maximum 40 A

Maximum 10 A

Supply frequency

47.5...63 Hz

Logic supply

Control voltage

24 Vdc (-20%...+25%)

Control current

Maximum current entry

Maximum current consumption

-

50 A (no overload permissible)

1.2 A

DC circuit

DC bus voltage

270...700 Vdc

DC bus capacitance

1.36 mF

Overvoltage

860 Vdc

Rated current (INc)

21 A with 1AC infeed

10 A with 1AC infeed

42 A with 3AC infeed

10 A with 3AC infeed

Peak current 1 s (ISC)

42 A with 1AC infeed

20 A with 1AC infeed

84 A with 3AC infeed

20 A with 3AC infeed

Rated power

22.1 kW at 3 Vac ~ 400 Vac

5.2 kW at 3 Vac ~ 400 Vac

26.6 kW at 3 Vac ~ 480 Vac

6.2 kW at 3 Vac ~ 480 Vac

Peak power

44.2 kW at 3 Vac ~ 400 Vac

10.4 kW at 3 Vac ~ 400 Vac

53.2 kW at 3 Vac ~ 480 Vac

12.5 kW at 3 Vac ~ 480 Vac

UBleeder ON

830 Vdc

UBleeder OFF

810 Vdc

DC bus unloading time

Maximum 15 min

Internal braking resistor

Resistance

15 Ω

Continuous power

400 W

Peak power

46 kW

Pulse energy

(periodic duty, 120 s)

4000 Ws (HW Rev. 01)

20000 Ws (HW Rev. 02)

Interface

Sercos

Integrated

Power loss

Electronics power supply

15 W

Power stage

3 W/A (maximum 126 W at 42 A)

Braking resistor (internal)

400 W

Outputs

Relay outputs

Ready relay, up to 6 A (maximum) for 1 s at 150 Vac and 1.5 A (cont.)

Ready relay, up to 6 A (maximum) for 1 s at 48 Vdc and 1.5 A (cont.)

Radio interference level

C3 (C2 with additional filter measures)

Protective class

Class

1 (IEC 61800-5-1)

Supported Supply Earthing Systems (IEC 60364-1)

TN with grounded wye system

Supported

TN with grounded neutral point corner-earthed

Not supported

TT systems

IT systems

System Voltage (IEC 61800-5-1)

-

Maximum 300 Vac

Overvoltage category

III (IEC 61800-5-1)

Ingress protection rating of the housing

IP20 with plug-in connectors

IEC/EN 60721-3-3

Pollution degree

2 (IEC 61800-5-1)

Weight

Weight (with packaging)

6.3 kg / 7.4 kg (13.9 lbs / 16.3 lbs)

NOTE: Due to the higher pulse energy of the braking resistor in hardware revision RS 02, the precharge of the system may be delayed up to 50 seconds, depending on the load state or the estimated worst-case load state of the braking resistor. In particular, this longer delay time can be noticed in situations where the load of the braking resistor is undefined to the system (for example after turning on the 24 V supply of the device or after a forced discharge of the DC Bus).

Dimensions - Lexium 62 Power Supply