TM7BDO8TAB

Introduction

TheTM7BDO8TAB expansion block is a 24 Vdc digital output block with 8 outputs.

For further information, refer to TM7BDO8TAB Block 8DO 24 Vdc Source.

TM7 Module I/O Mapping Tab

Variables can be defined and named in the TM7 Module I/O Mapping tab. Additional information such as topological addressing is also provided in this tab.

This table describes the I/O Mapping configuration:

Variable

Channel

Type

Description

ModuleOK

BYTE

State of the compact I/O and electronic modules

DiagIn1

BYTE

Status bit associated to each output:

o0: OK

o1: Error detected

Outputs

DigitalOutput00

...

DigitalOutput07

BOOL

Command of output 0

...

Command of output 7

NOTE: The number of the DigitalOutput•• corresponds at the same number of the StatusDigi­talOutput••. The StatusDigitalOutputs is not used If the Output status parameter is disabled.

For further generic descriptions, refer to I/O Mapping Tab Description.

User-Defined Parameters Tab

This module has no default user-defined parameters.