FWVersionCheck

General

Type	EF
Devices supporting the parameter	TM5CSLCx00FS
Traceable	Yes

Functional Description

This parameter allows you to disable the firmware compatibility verification during Sercos phase-up of the connected safety-related equipment for test purposes.

WARNING
	UNINTENDED EQUIPMENT OPERATION Only disable the firmware compatibility verification through the parameter FWVersionCheck for test purposes and only under the condition that no equipment is connected that can cause hazardous movements of any type whatsoever. Verify that the firmware compatibility verification through the parameter FWVersionCheck is enabled before commissioning and operating your machine/process. Failure to follow these instructions can result in death, serious injury, or equipment damage.

WARNING

UNINTENDED EQUIPMENT OPERATION

Only disable the firmware compatibility verification through the parameter FWVersionCheck for test purposes and only under the condition that no equipment is connected that can cause hazardous movements of any type whatsoever.
Verify that the firmware compatibility verification through the parameter FWVersionCheck is enabled before commissioning and operating your machine/process.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

NOTE: If you disable the firmware compatibility verification, Sercos phase-up is not inhibited, but the message logger provides information on devices with incompatible firmware versions, if any.