IF_TeachingFixedSystem - SetProcedureData (Method)

Overview

Type:	Method
Available as of:	V1.8.0.0

This chapter provides information on:

Sets the data for the procedure.

The method SetProcedureData (...) is used to set the data required by the procedure.

NOTE: When the method is called, all the stored samples are removed.

Access: PUBLIC

Input	Data type	Description
i_stData	ST_TeachingFixedSystemData	Data required by a fixed system teaching procedure.

Output	Data type	Description
q_xError	BOOL	TRUE: An error occurred during last command. For more information refer also to q_etResult and q_sResultMsg.
q_etResult	ET_Result	Provides diagnostic and status information. If q_xError = FALSE, then q_etResult provides status information. If q_xError = TRUE, then q_etResult provides diagnostic/error information. The enumeration ET_Result contains the possible values of the POU operation results.
q_sResultMsg	STRING[80]	Provides additional information about the current status of the POU.

Output

Data type

Description

q_xError

BOOL

TRUE: An error occurred during last command. For more information refer also to q_etResult and q_sResultMsg.

q_etResult

Provides diagnostic and status information.

If q_xError = FALSE, then q_etResult provides status information.

If q_xError = TRUE, then q_etResult provides diagnostic/error information.

The enumeration ET_Result contains the possible values of the POU operation results.

q_sResultMsg

STRING[80]

Provides additional information about the current status of the POU.