Cleaning

Cleaning the Controller

Step

Action

1

De-energize the controller.

2

Remove the controller.

3

Blow out the controller with dry pressurized air (maximum 1 bar (14.5 PSI)).

Care must be taken with cleaning products as some active agents may have deleterious effects on plastics and stainless steel welds.

NOTICE
CORROSION CAUSED BY CLEANING AGENTS
  • Before using a cleaning agent, carry out a compatibility test in relation to the cleaning agent and the component affected.
  • Do not use alkaline detergent.
  • Do not use any chlorid-containing cleaning agents.
Failure to follow these instructions can result in equipment damage.

For more information on the material properties of your component, refer to Mechanical and Electrical Data.