Presentation
When replacing controllers, be sure to observe the important safety information in the sections of the present document concerning mounting and dismounting components.
With exception of batteries, there are no other user-serviceable parts within the controllers. Either replace the controller or contact your Schneider Electric service representative.
|
WARNING
|
|
UNINTENDED EQUIPMENT OPERATION
-
Only use software and hardware components approved by Schneider Electric for use with this equipment.
-
Do not attempt to service this equipment outside of authorized Schneider Electric service centers.
-
Update your application program every time you change the physical hardware configuration.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
|
Use only the accessories and mounting parts specified in the documentation and no third-party devices or components that have not been expressly approved by Schneider Electric. Do not modify the equipment.
In case machine repair includes the replacement of the drive components, observe the following instructions for ESD protection in order to avoid any damage due to electrostatic discharge:
|
NOTICE
|
|
ELECTROSTATIC DISCHARGE
-
Do not touch any of the electrical connections or components.
-
Prevent electrostatic charges, for example, by wearing appropriate clothing.
-
If you must touch circuit boards, do so only on the edges.
-
Remove existing static charge by touching a grounded, metallic surface.
Failure to follow these instructions can result in equipment damage.
|