|
Type |
ED |
|
Offline editable |
Yes |
|
Devices supporting the parameter |
Lexium LXM62 Drive, Lexium LXM62 Linear Drive, Lexium ILM62 Drive Module |
|
Traceable |
No |
The parameter represents the name of the power supply to which the drive is connected to its DC bus . If no power supply was assigned, the first power supply in the control configuration is assigned automatically. It is not possible to verify automatically which drive was connected to which power supply.
|
NOTICE |
|
INCORRECT ASSIGNMENT OF THE DRIVES TO THE POWER SUPPLY |
|
Ensure that the drive(s) physically connected to the power supply are also logically assigned to that power supply. |
|
Failure to follow these instructions can result in equipment damage. |
NOTE: Is only assigned once when booting the controller. No Sercos reset parameter.
NOTE: The ConfiguredPowerSupply parameter of the devices LXM62DxS, Lexium 62 ILM, and LXM62DxSLinear is no reset parameter and, as of (V1.50.1.2), is taken over after phase 1.
