General Information About Maintenance, Repair, and Cleaning

Overview

The use and application of the information contained herein require expertise in the design and programming of automated control systems. Only you, the user, machine builder or integrator, can be aware of all the conditions and factors present during installation and setup, operation, repair, and maintenance of the machine or process.

You must also consider any applicable standards and/or regulations with respect to grounding of all equipment. Verify compliance with any safety information, different electrical requirements, and normative standards that apply to your machine or process in the use of this equipment.

  DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
  • Disconnect all power from all equipment including connected devices prior to removing any covers or doors, or installing or removing any accessories, hardware, cables, or wires except under the specific conditions specified in the appropriate hardware guide for this equipment.
  • Always use a properly rated voltage sensing device to confirm the power is off where and when indicated.
  • Replace and secure all covers, accessories, hardware, cables, and wires and confirm that a proper ground connection exists before applying power to this equipment.
  • Use only the specified voltage when operating this equipment and any associated equipment.
Failure to follow these instructions will result in death or serious injury.

Insufficient maintenance can lead to premature wear, or even present potential safety hazards for production or maintenance operators.

 WARNING
UNINTENDED EQUIPMENT OPERATION
Develop and follow a maintenance plan and associated protocols adapted to the requirements of your application and equipment.
Failure to follow these instructions can result in death, serious injury, or equipment damage.

Servicing

In case of issues which cannot be resolved, contact your local Schneider Electric service representative with the following information:

  • Type plate information (type, identification number, serial number, date of manufacture)

  • Detailed description of the issue

  • Previous and associated circumstances