|
Step |
Action |
|---|---|
|
1 |
Right-click somewhere in the register card and select the entry from the context menu or click the button . Result: The data is loaded and displayed in the register card . During the loading procedure, a progress bar shows the status bar and the status information. |
This function is only available if it is a drive or power supply that was configured real with the WorkingMode (HostParameterSet ID: 196).
For axes that were added by a Sercos scan, this applies automatically.
Furthermore, an online connection to the controller must exist.
The following errors can occur and are displayed in the message overview:
The connection could not be established because no valid IP address or no active path was specified (No valid IP address/valid active path was entered).
The connection could not be established (Unable to connect to controller).
Exception of controller is issued (The Logger could not be loaded).
Residual error (The Logger could not be loaded).