8055 Controller message HW monitor
Refer to Diagnostic class (standard): 1
MsgFilter: Bit 14 Filter Type 15
Refer to the diagnostic messages 8056 Supply voltage low and 8827 Controller power-off/hardware monitor.
DiagMsg:
oSpecific diagnostic message for debugging purposes.
oStructure: <last error entry> : <error group> : <cause of error>
Error groups:
oVoltageError
oTempError
oEnvError
Cause of error (VoltageError):
oV3.3 < Vmin
oV5 < Vmin
oV+12 < Vmin
oV-12 < Vmin
oVin < Vshutd
oVAccu < Vshutd
oVin_jit < Vshutd
ocapacitance
oLTC error
oVin > Vmax
oVAccu > Vmax
oV3.3 > Vmax
oV5 > Vmax
oV+12 > Vmax
oV-12 > Vmax
oVcpuCore < Vmin
oVcpuIO < Vmin
oVM2.5 < Vmin
oVM3.3 < Vmin
oVM5 < Vmin
oVM+12 < Vmin
oVM-12 < Vmin
oVcpuCore > Vmax
oVcpuIO > Vmax
oVM2.5 > Vmax
oVM3.3 > Vmax
oVM5 > Vmax
oVM+12 > Vmax
oVM-12 > Vmax
Cause of error (TempError):
oVin < Vmin
oVAccu < Vmin
oTAccu < Tmin
oTLM75 < Tmin
oTCPU < Tmin
oTM1 < Tmin
oTM2 < Tmin
oTAccu > Tshutd
oTLM75 > Tshutd
oTCPU > Tshutd
oTM1 > Tshutd
oTM2 > Tshutd
oTAccu > Tmax
oTLM75 > Tmax
oTCPU > Tmax
oTM1 > Tmax
oTM2 > Tmax
oI2C bus failed
oLM75 failed
Cause of error (EnvError):
ofan1stop-shutd
ofan1stop-off
ofan2stop-shutd
ofan2stop-off
ofan3stop-shutd
ofan3stop-off
Example of message text:
|
-1 : TempError : TLM75 > Tshutd |
The error was in the last created error entry. It is a temperature error in which the LM75 sensor detected a temperature that is too high. The shutdown limit was exceeded, and so the system shut down after the timer ran out. |
