This table describes the input pins of the Operation_Mode function block:
|
Input |
Data Type |
Description |
|---|---|---|
|
i_xAut |
BOOL |
TRUE: Automatic mode enabled FALSE: Disabled (factory setting) |
|
i_xMan |
BOOL |
TRUE: Manual mode enabled. FALSE: Disabled. (factory setting) |
|
i_xLoc |
BOOL |
TRUE: Local mode enabled FALSE: Disabled. (factory setting) |
|
i_xErr |
BOOL |
TRUE: External detected error is active. FALSE: No external detected error. (factory setting) |
|
i_xAckn |
BOOL |
Acknowledgement is done with a rising edge. Input to acknowledge internal and external detected errors indicated at the output q_xErr. |
|
i_dwCtrl |
DWORD |
Command bits to interact from the HMI Range: 0...4294967295 Refer to the status word description |
