Users and Groups and Access Right tabs allows to manage user accounts, user access rights groups and the associated access rights, to control the access on projects. For more informations, refer to the EcoStruxure Machine Expert Programming Guide.
Login and password are set by default, must be activated and can be reset as origin.
This table describes how to log in:
|
Server/feature |
Default values Login / Password |
First user right activation Login / Password |
After user right activated Login / Password |
|---|---|---|---|
|
EcoStruxure Machine Expert |
No login or password required |
Administrator / Administrator |
Administrator / configured password |
|
Web server |
Anonymous / No password required |
No login or password required |
Administrator / configured password |
|
FTP |
Anonymous / Anonymous |
No login or password required |
Administrator / configured password |
|
OPC-UA |
Anonymous / No password required |
No login or password required |
Administrator / configured password |
|
Change Device Name feature |
No login or password required |
No login or password required |
Administrator / configured password |
|
|
|
UNAUTHORIZED DATA AND/OR APPLICATION ACCESS |
|
oSecure access to the FTP/Web/OPC-UA server(s) using User Rights. oIf you do not enable User Rights, disable the server(s) to prevent any unwanted or unauthorized access to your application and/or data. |
|
Failure to follow these instructions can result in death, serious injury, or equipment damage. |
NOTE: After the user rights are activated, anonymous log in is no longer permitted by the controller.
NOTE: Only ASCII characters are supported by the controller.
One user and two groups are set by default:
oUser: Administrator
oGroups: Administrator and Everyone
You can give Access Rights to groups.
You can allow the following operations through the access rights:
oVIEW
oMODIFY
oEXECUTE
oADD_REMOVE
