Emulation Settings

• If this option is activated, the user interface of EcoStruxure Machine Expert Twin opens when an emulation is started. After the session has been established, the configured object, for example, one multi carrier track or one robot, is visible both in the tool you are using, for example, EcoStruxure Machine Expert, and in the EcoStruxure Machine Expert Twin user interface.

• If this option is not activated, the EcoStruxure Machine Expert Twin opens in the background when an emulation is started. After the session has been established, the configured object is only visible in the tool you are using, for example, the Emulation tab of the Multicarrier Configuration editor .

OPCUA Server on Controller

• If this option is activated, the field IP is disabled and the IP address of the OPC UA server is retrieved from the controller configuration.

  NOTE: To use this option, the Connection Mode > IP Address must be selected in the Communication Settings tab of the device editor.

• If this option is not activated, enter the IP address of the OPC UA server in the field IP.

• If this option is activated, user name and password are not required to establish a connection to the OPC UA server.

  NOTE: Activate this option only in case the option Disable anonymous login was not activated in the General Settings tab of the OPC UA Server Configuration of the PacDrive LMC controller.

• If this option is not activated, you are requested to enter user name and password when you start the emulation to establish a connection to the OPC UA server.

  NOTE: The credentials are retained until the EcoStruxure Machine Expert project is closed.